BRIDAL COLLECTION BY RHINESTONE DECALS  
#50180814

$8.99
 
 

ORDERS OVER $85 SHIPPED FREE

High quality clear sparkling rhinestones are used in all our designs. Iron on is easy, fun and a very satisfying activity. All you will need is a common household iron. 

Price includes one iron-on transfer. Shipping charges for one item is $2.50. Additional items are shipped for  only .50 cents each. Please note - Shipping Charges will be adjusted during processing.  Made in USA.

Bridal Collection of Iron On Clear Rhinestone Appliques includes following

Bride            
4.25 x 1.5 (110 x 40)
Groom             
4.25 x 1.5 (110 x 40)
Bridesmaid 
6 x 1.25  (152 x 32)
Maid of Honor 
5.25 x 2.75 (133 x 70)
Matron of Honor
6 x 2.75  (150 x 70)
Flower Girl
4 x 2.75  (100 x 70)
Just Married
6.5 x 1.5  (165 x 40)
Bachelorette 
6 x 1.25 (152 x 34)
Available
6 x 1.5  (152 x 40)
Bride to Be 
6.25 x 1.5 (160 x 40)
Single
4 x 1.5(100 x 40)
Taken
3.25 x 1.5 (80 x 40)
Mother of the Bride
5.5 x 2.75 (140 x 70)
Mother of the Groom   
5.5 x 2.75 (140 x 70)
Grandmother ot the Bride
6.25 x 3.5 (160 x 90)
Grandmother of the Groom
6.25 x 3.5 (160 x 90)
                                  
 
 
 
 
 
 

 

 

 

 


 

HOW TO APPLY IRON ON TRANSFERS

  1. Carefully remove the white paper backing.
  2. Position the design onto fabric. Clear Mylar film will hold the design together.
  3. Set your iron to the proper temperature for the material. Delicate setting for finer fabrics like silk or polyester, higher setting for cotton and denim. Allow iron to heat thoroughly. MAKE SURE STEAM IS OFF.
  4. Leave iron on the design for approximately 25-45 seconds. Allow more time for cotton and denim, and less time for finer fabrics. For large designs you may need to move the iron several times to heat all the trims. When applying transfers with large rhinestones, allow extra time due to thickness of crystal.
  5. Turn the item inside out and press again from the back. THIS IS THE MOST IMPORTANT STEP IN APPLICATION PROCESS.
  6. Allow to cool for approximately 3-5 minutes so that hot glue resets and forms a permanent bond with fabric.
  7. Slowly pull off clear Mylar film. If, while removing the Mylar, any of the trims are not firmly attached, carefully reposition the Mylar and repeat the ironing process.
  8. Allow the trims to cool and rub your fingers over them. If any trims feel loose, reapply the iron as above. 
You may also like ...
HEARTS, RED
RHINESTONE DECALS
#DANCING HEARTS
$8.99
HEARTS, BROWN
RHINESTONE DECALS
#PLAID
$11.99
HEARTS, CLEAR
RHINESTONE DECALS
#WINDY HEART
$16.99
SiteLock